Kontakthantering

I detta avsnitt kommer du att få reda på hur du hittar och lägger till en kontakt från DHT till kunden. Användningen av en namnserver förklaras inte här. Om du vill ha mer information om det, läs namn-server-protokol.

Närvaro i nätverket

Anmäla närvaron på DHT

Närvaro är ganska enkelt att meddela på DHT. I själva verket är det bara ett värde som innehåller enheten hash (se föregående avsnitt, konto-hantering) på hashet motsvarande fingeravtrycket på nyckeln. Så om vi har kontot bf5f1e21d3eb2c1246946aa49d5dcf3e5b9cb1b9 med enheten 62fbdff0ce86f368c7d3c2682539e5ba9e06404f, kommer följande definierade värde att skickas över DHT:

/**
 * Device announcement stored on DHT.
 */
struct DeviceAnnouncement : public dht::SignedValue<DeviceAnnouncement>
{
private:
    using BaseClass = dht::SignedValue<DeviceAnnouncement>;

public:
    static const constexpr dht::ValueType& TYPE = dht::ValueType::USER_DATA;
    dht::InfoHash dev;
    std::shared_ptr<dht::crypto::PublicKey> pk;
    MSGPACK_DEFINE_MAP(dev, pk)
};

(Detta värde kan sättas med dht_.put(h, VALUE, dht::DoneCallback{}, {}, true);, som ett permanent sätt). Om enheten meddelas, är enheten närvarande. För närvarande finns det inget sätt att ta bort eller redigera ett värde på DHT (det kommer när OpenDHT kommer att stödja ECC).

Ring om någon är närvarande.

Now our presence on the network, it’s time to get if somebody is present on the DHT. With the previous section, it’s easy to do the reverse process. To know if somebody is present on the DHT (ex: bf5f1e21d3eb2c1246946aa49d5dcf3e5b9cb1b9), we have to get value at bf5f1e21d3eb2c1246946aa49d5dcf3e5b9cb1b9 and retrieve the DeviceAnnouncement on this hash. The related code in the daemon is in jamiaccount.cpp:

auto shared = std::static_pointer_cast<RingAccount>(shared_from_this());
auto treatedDevices = std::make_shared<std::set<dht::InfoHash>>();
dht_.get<dht::crypto::RevocationList>(to, [to](dht::crypto::RevocationList&& crl){
    tls::CertificateStore::instance().pinRevocationList(to.toString(), std::move(crl));
    return true;
});
dht_.get<DeviceAnnouncement>(to, [shared,to,treatedDevices,op](DeviceAnnouncement&& dev) {
    if (dev.from != to)
        return true;
    if (treatedDevices->emplace(dev.dev).second)
        op(shared, dev.dev);
    return true;
}, [=](bool /*ok*/){
    {
        std::lock_guard<std::recursive_mutex> lock(shared->buddyInfoMtx);
        auto buddy_info_it = shared->trackedBuddies_.find(to);
        if (buddy_info_it != shared->trackedBuddies_.end()) {
            if (not treatedDevices->empty()) {
                for (auto& device_id : *treatedDevices)
                    shared->onTrackedBuddyOnline(buddy_info_it, device_id);
            } else
                shared->onTrackedBuddyOffline(buddy_info_it);
        }
    }
    RING_DBG("[Account %s] found %lu devices for %s",
                getAccountID().c_str(), treatedDevices->size(), to.to_c_str());
    if (end) end(shared, not treatedDevices->empty());
});

And that’s all.

Client perspective

<method name="subscribeBuddy" tp:name-for-bindings="subscribeBuddy">
    <tp:docstring>
        Ask be be notified when 'uri' presence change
    </tp:docstring>
    <tp:added version="1.3.0"/>
    <arg type="s" name="accountID" direction="in">
        <tp:docstring>
            An account from which get request presence informations
        </tp:docstring>
    </arg>
    <arg type="s" name="uri" direction="in">
        <tp:docstring>
            A SIP uri to watch
        </tp:docstring>
    </arg>
    <arg type="b" name="flag" direction="in">
        <tp:docstring>
        </tp:docstring>
    </arg>
</method>

<signal name="newBuddyNotification" tp:name-for-bindings="newBuddyNotification">
    <tp:added version="1.3.0"/>
    <tp:docstring>
        Notify when a registered presence uri presence informations changes
    </tp:docstring>
    <arg type="s" name="accountID">
        <tp:docstring>
            The associated account
        </tp:docstring>
    </arg>
    <arg type="s" name="buddyUri">
        <tp:docstring>
            The registered URI
        </tp:docstring>
    </arg>
    <arg type="i" name="status">
        <tp:docstring>
            Is the URI present or not
        </tp:docstring>
    </arg>
    <arg type="s" name="lineStatus">
        <tp:docstring>
            A string containing informations from the user (human readable)
        </tp:docstring>
    </arg>
</signal>

<method name="publish" tp:name-for-bindings="publish">
    <tp:added version="1.3.0"/>
    <arg type="s" name="accountID" direction="in">
        <tp:docstring>
            The account from which the presence will be emitted
        </tp:docstring>
    </arg>
    <arg type="b" name="status" direction="in">
        <tp:docstring>
            Is this account present or not
        </tp:docstring>
    </arg>
    <arg type="s" name="note" direction="in">
        <tp:docstring>
            A message transmitted by the server to other users
        </tp:docstring>
    </arg>
</method>

Are the main APIs for clients. subscribeBuddy will listen on the DHT to detect presence changes and newBuddyNotification will be sent whenever a new status is detected:

• The status sent to the client is now 0=offline (no device found on the DHT), 1=dht_presence (at least a device is found on the DHT), 2=connected (with a TCP + SIP channel, so ready to exchange data).

• lineStatus will contain any custom status sent by the peer (e.g. Lunch Time!)

publish is used for publishing a custom note (status is ignored for Jami accounts, note will contain the custom status).

RFC3863 is used to send status over the SIP connection.

Överhängande begäran

Skicka en begäran

Todo-behovsförfrågan

Slutligen, när förtroendeanvändningen är utformad, kan vi trycka begäran till följande hash: InfoHash("inbox:" + deviceId)

Följande kod används i daemon:

dht_.putEncrypted(dht::InfoHash::get("inbox:"+dev.toString()), dev, dht::TrustRequest(DHT_TYPE_NS, payload));

Att få en begäran

TODO

(Ackceptera/Blockera/Avvisa)

Daemon API

Alla metoder för att följa närvaron av en kompis finns i PresenceManager såsom:

<signal name="newBuddyNotification" tp:name-for-bindings="newBuddyNotification">
    <tp:added version="1.3.0"/>
    <tp:docstring>
        Notify when a registered presence uri presence informations changes
    </tp:docstring>
    <arg type="s" name="accountID">
        <tp:docstring>
            The associated account
        </tp:docstring>
    </arg>
    <arg type="s" name="buddyUri">
        <tp:docstring>
            The registered URI
        </tp:docstring>
    </arg>
    <arg type="b" name="status">
        <tp:docstring>
            Is the URI present or not
        </tp:docstring>
    </arg>
    <arg type="s" name="lineStatus">
        <tp:docstring>
            A string containing informations from the user (human readable)
        </tp:docstring>
    </arg>
</signal>

Alla metoder och signaler som används för att hantera förtroendeförfrågningar och kontakter finns i ConfigurationManager såsom:

<method name="getTrustRequests" tp:name-for-bindings="getTrustRequests">
    <tp:added version="2.2.0"/>
    <arg type="s" name="accountID" direction="in">
    </arg>
    <annotation name="org.qtproject.QtDBus.QtTypeName.Out0" value="VectorMapStringString"/>
    <arg type="aa{ss}" name="requests" direction="out" >
        <tp:docstring>
            A list of contact request details. Details:
            - from: account ID of sender
            - received: UNIX timestamp of reception date
            - payload: attached payload
        </tp:docstring>
    </arg>
</method>

<method name="acceptTrustRequest" tp:name-for-bindings="acceptTrustRequest">
    <tp:added version="2.2.0"/>
    <arg type="s" name="accountID" direction="in">
    </arg>
    <arg type="s" name="from" direction="in">
    </arg>
    <arg type="b" name="success" direction="out" tp:type="Boolean">
        <tp:docstring>
            True if the operation succeeded.
        </tp:docstring>
    </arg>
</method>

<method name="discardTrustRequest" tp:name-for-bindings="discardTrustRequest">
    <tp:added version="2.2.0"/>
    <arg type="s" name="accountID" direction="in">
    </arg>
    <arg type="s" name="from" direction="in">
    </arg>
    <arg type="b" name="success" direction="out" tp:type="Boolean">
        <tp:docstring>
            True if the operation succeeded.
        </tp:docstring>
    </arg>
</method>

<signal name="incomingTrustRequest" tp:name-for-bindings="incomingTrustRequest">
    <tp:added version="2.2.0"/>
    <tp:docstring>
        Notify clients that a new contact request has been received.
    </tp:docstring>
    <arg type="s" name="accountID">
    </arg>
    <arg type="s" name="from">
    </arg>
    <arg type="ay" name="payload">
    </arg>
    <arg type="t" name="receiveTime">
    </arg>
</signal>

<method name="sendTrustRequest" tp:name-for-bindings="sendTrustRequest">
    <tp:added version="2.2.0"/>
    <arg type="s" name="accountID" direction="in">
    </arg>
    <arg type="s" name="to" direction="in">
    </arg>
    <arg type="ay" name="payload" direction="in">
    </arg>
</method>

<method name="addContact" tp:name-for-bindings="addContact">
    <tp:added version="3.0.0"/>
    <arg type="s" name="accountID" direction="in">
    </arg>
    <arg type="s" name="uri" direction="in">
    </arg>
</method>

<method name="removeContact" tp:name-for-bindings="removeContact">
    <tp:added version="3.0.0"/>
    <arg type="s" name="accountID" direction="in">
    </arg>
    <arg type="s" name="uri" direction="in">
    </arg>
    <arg type="b" name="ban" direction="in" tp:type="Boolean">
        <tp:docstring>
            True if the the contact should be banned.
            If false, the contact is removed from the contact list (banned or not).
        </tp:docstring>
    </arg>
</method>

Om du vill ha några exempel används dessa metoder i contactmodel.cpp i LRC.