Contactbeheer

In dit gedeelte wordt aangegeven hoe een contact van de DHT naar de cliënt te vinden en toe te voegen. Het gebruik van een naamserver wordt hier niet uitgelegd.

Aanwezigheid op het netwerk

Vermeld de aanwezigheid op de DHT

De aanwezigheid is vrij eenvoudig om te melden op de DHT. In feite is het slechts een waarde die de apparaat hash bevat (zie het vorige gedeelte, Rekeningbeheer) op de hash die overeenkomt met de vingerafdruk van de sleutel. Dus, als we de rekening bf5f1e21d3eb2c1246946aa49d5dcf3e5b9cb1b9 hebben met het apparaat 62fbdff0ce86f368c7d3c2682539e5ba9e06404f, wordt de volgende gedefinieerde waarde via de DHT verzonden:

/**
 * Device announcement stored on DHT.
 */
struct DeviceAnnouncement : public dht::SignedValue<DeviceAnnouncement>
{
private:
    using BaseClass = dht::SignedValue<DeviceAnnouncement>;

public:
    static const constexpr dht::ValueType& TYPE = dht::ValueType::USER_DATA;
    dht::InfoHash dev;
    std::shared_ptr<dht::crypto::PublicKey> pk;
    MSGPACK_DEFINE_MAP(dev, pk)
};

(Deze waarde kan worden geplaatst met dht_.put(h, VALUE, dht::DoneCallback{}, {}, true);, als een permanente put). Als het apparaat wordt aangekondigd, is het apparaat aanwezig. Voorlopig is er geen manier om een waarde op de DHT te verwijderen of te bewerken (dit komt wanneer OpenDHT ECC ondersteunt).

Bel als er contact is.

Now our presence on the network, it’s time to get if somebody is present on the DHT. With the previous section, it’s easy to do the reverse process. To know if somebody is present on the DHT (ex: bf5f1e21d3eb2c1246946aa49d5dcf3e5b9cb1b9), we have to get value at bf5f1e21d3eb2c1246946aa49d5dcf3e5b9cb1b9 and retrieve the DeviceAnnouncement on this hash. The related code in the daemon is in jamiaccount.cpp:

auto shared = std::static_pointer_cast<RingAccount>(shared_from_this());
auto treatedDevices = std::make_shared<std::set<dht::InfoHash>>();
dht_.get<dht::crypto::RevocationList>(to, [to](dht::crypto::RevocationList&& crl){
    tls::CertificateStore::instance().pinRevocationList(to.toString(), std::move(crl));
    return true;
});
dht_.get<DeviceAnnouncement>(to, [shared,to,treatedDevices,op](DeviceAnnouncement&& dev) {
    if (dev.from != to)
        return true;
    if (treatedDevices->emplace(dev.dev).second)
        op(shared, dev.dev);
    return true;
}, [=](bool /*ok*/){
    {
        std::lock_guard<std::recursive_mutex> lock(shared->buddyInfoMtx);
        auto buddy_info_it = shared->trackedBuddies_.find(to);
        if (buddy_info_it != shared->trackedBuddies_.end()) {
            if (not treatedDevices->empty()) {
                for (auto& device_id : *treatedDevices)
                    shared->onTrackedBuddyOnline(buddy_info_it, device_id);
            } else
                shared->onTrackedBuddyOffline(buddy_info_it);
        }
    }
    RING_DBG("[Account %s] found %lu devices for %s",
                getAccountID().c_str(), treatedDevices->size(), to.to_c_str());
    if (end) end(shared, not treatedDevices->empty());
});

En dat is alles.

Client perspective

<method name="subscribeBuddy" tp:name-for-bindings="subscribeBuddy">
    <tp:docstring>
        Ask be be notified when 'uri' presence change
    </tp:docstring>
    <tp:added version="1.3.0"/>
    <arg type="s" name="accountID" direction="in">
        <tp:docstring>
            An account from which get request presence informations
        </tp:docstring>
    </arg>
    <arg type="s" name="uri" direction="in">
        <tp:docstring>
            A SIP uri to watch
        </tp:docstring>
    </arg>
    <arg type="b" name="flag" direction="in">
        <tp:docstring>
        </tp:docstring>
    </arg>
</method>

<signal name="newBuddyNotification" tp:name-for-bindings="newBuddyNotification">
    <tp:added version="1.3.0"/>
    <tp:docstring>
        Notify when a registered presence uri presence informations changes
    </tp:docstring>
    <arg type="s" name="accountID">
        <tp:docstring>
            The associated account
        </tp:docstring>
    </arg>
    <arg type="s" name="buddyUri">
        <tp:docstring>
            The registered URI
        </tp:docstring>
    </arg>
    <arg type="i" name="status">
        <tp:docstring>
            Is the URI present or not
        </tp:docstring>
    </arg>
    <arg type="s" name="lineStatus">
        <tp:docstring>
            A string containing informations from the user (human readable)
        </tp:docstring>
    </arg>
</signal>

<method name="publish" tp:name-for-bindings="publish">
    <tp:added version="1.3.0"/>
    <arg type="s" name="accountID" direction="in">
        <tp:docstring>
            The account from which the presence will be emitted
        </tp:docstring>
    </arg>
    <arg type="b" name="status" direction="in">
        <tp:docstring>
            Is this account present or not
        </tp:docstring>
    </arg>
    <arg type="s" name="note" direction="in">
        <tp:docstring>
            A message transmitted by the server to other users
        </tp:docstring>
    </arg>
</method>

Are the main APIs for clients. subscribeBuddy will listen on the DHT to detect presence changes and newBuddyNotification will be sent whenever a new status is detected:

• The status sent to the client is now 0=offline (no device found on the DHT), 1=dht_presence (at least a device is found on the DHT), 2=connected (with a TCP + SIP channel, so ready to exchange data).

• lineStatus will contain any custom status sent by the peer (e.g. Lunch Time!)

publish is used for publishing a custom note (status is ignored for Jami accounts, note will contain the custom status).

RFC3863 is used to send status over the SIP connection.

Oplopend verzoek

Stuur een verzoek

Verslag van TODO-vaartuigen

Als het vertrouwen verzoek is ingesteld, kunnen we het verzoek vervolgens naar de volgende hash zetten: InfoHash("inbox:" + deviceId)

De volgende code wordt gebruikt in de daemon:

dht_.putEncrypted(dht::InfoHash::get("inbox:"+dev.toString()), dev, dht::TrustRequest(DHT_TYPE_NS, payload));

Ontvangs van een verzoek

TODO

(Acceptatie/Blok/Verwijdering)

Daemon API

Alle methoden om de aanwezigheid van een vriend te volgen zijn in de PresenceManager zoals:

<signal name="newBuddyNotification" tp:name-for-bindings="newBuddyNotification">
    <tp:added version="1.3.0"/>
    <tp:docstring>
        Notify when a registered presence uri presence informations changes
    </tp:docstring>
    <arg type="s" name="accountID">
        <tp:docstring>
            The associated account
        </tp:docstring>
    </arg>
    <arg type="s" name="buddyUri">
        <tp:docstring>
            The registered URI
        </tp:docstring>
    </arg>
    <arg type="b" name="status">
        <tp:docstring>
            Is the URI present or not
        </tp:docstring>
    </arg>
    <arg type="s" name="lineStatus">
        <tp:docstring>
            A string containing informations from the user (human readable)
        </tp:docstring>
    </arg>
</signal>

Alle methoden en signalen die worden gebruikt om vertrouwensverzoeken en contacten te beheren, zijn in de ConfigurationManager zoals:

<method name="getTrustRequests" tp:name-for-bindings="getTrustRequests">
    <tp:added version="2.2.0"/>
    <arg type="s" name="accountID" direction="in">
    </arg>
    <annotation name="org.qtproject.QtDBus.QtTypeName.Out0" value="VectorMapStringString"/>
    <arg type="aa{ss}" name="requests" direction="out" >
        <tp:docstring>
            A list of contact request details. Details:
            - from: account ID of sender
            - received: UNIX timestamp of reception date
            - payload: attached payload
        </tp:docstring>
    </arg>
</method>

<method name="acceptTrustRequest" tp:name-for-bindings="acceptTrustRequest">
    <tp:added version="2.2.0"/>
    <arg type="s" name="accountID" direction="in">
    </arg>
    <arg type="s" name="from" direction="in">
    </arg>
    <arg type="b" name="success" direction="out" tp:type="Boolean">
        <tp:docstring>
            True if the operation succeeded.
        </tp:docstring>
    </arg>
</method>

<method name="discardTrustRequest" tp:name-for-bindings="discardTrustRequest">
    <tp:added version="2.2.0"/>
    <arg type="s" name="accountID" direction="in">
    </arg>
    <arg type="s" name="from" direction="in">
    </arg>
    <arg type="b" name="success" direction="out" tp:type="Boolean">
        <tp:docstring>
            True if the operation succeeded.
        </tp:docstring>
    </arg>
</method>

<signal name="incomingTrustRequest" tp:name-for-bindings="incomingTrustRequest">
    <tp:added version="2.2.0"/>
    <tp:docstring>
        Notify clients that a new contact request has been received.
    </tp:docstring>
    <arg type="s" name="accountID">
    </arg>
    <arg type="s" name="from">
    </arg>
    <arg type="ay" name="payload">
    </arg>
    <arg type="t" name="receiveTime">
    </arg>
</signal>

<method name="sendTrustRequest" tp:name-for-bindings="sendTrustRequest">
    <tp:added version="2.2.0"/>
    <arg type="s" name="accountID" direction="in">
    </arg>
    <arg type="s" name="to" direction="in">
    </arg>
    <arg type="ay" name="payload" direction="in">
    </arg>
</method>

<method name="addContact" tp:name-for-bindings="addContact">
    <tp:added version="3.0.0"/>
    <arg type="s" name="accountID" direction="in">
    </arg>
    <arg type="s" name="uri" direction="in">
    </arg>
</method>

<method name="removeContact" tp:name-for-bindings="removeContact">
    <tp:added version="3.0.0"/>
    <arg type="s" name="accountID" direction="in">
    </arg>
    <arg type="s" name="uri" direction="in">
    </arg>
    <arg type="b" name="ban" direction="in" tp:type="Boolean">
        <tp:docstring>
            True if the the contact should be banned.
            If false, the contact is removed from the contact list (banned or not).
        </tp:docstring>
    </arg>
</method>

Als u een aantal voorbeelden wilt, worden deze methoden gebruikt in contactmodel.cpp in LRC.